Disassembling the Handle Assembly (continued)
29. Remove the flange nut (item 8 in
), and bolt (2) that secure the
clutch bail link (5) to the handle mount (7). Remove the 2 flange bushings
(3) and spacer tube (17) from the handle mount.
30. Remove the flange nut (8) and bolt (2) that secure the clutch bail assembly
(4) to the handle mount (7). Remove the clutch bail assembly from the
handle mount. Remove the compression spring (6), 2 flange bushings (3)
and spacer tube (17) from the handle mount.
31. Remove the 2 nuts (14) and 2 bolts (16) that secures the handle mount (7)
to the upper receiver weldment (15). Remove the handle mount from the
upper receiver weldment.
g313848
Figure 60
1.
Lower handle assembly
4.
Nut
2.
Bolt
5.
Frame assembly
3.
Washer (2 each)
32. If necessary, remove the nut (item 4 in
), washers (3) and bolt (2)
that secures the lower handle assembly (1) to the frame assembly (5).
Assembling the Handle Assembly
1. If removed, install the lower handle assembly (item 1 in
) onto the
frame assembly (5) and secure with the bolt (2), washers (3) and nut (4).
2. Lift the lower handle assembly to maximum top position and torque tighten
the bolt (2) to
5.6 to 6.2 N·m (50 to 55 ft-lb)
.
3. Install the handle mount (7) to the upper receiver weldment (15) and secure
with 2 bolts (16) and 2 nuts (14).
Greensmaster
®
1018/1021/1026
Page 7–21
Controls, Wheels and Accessories : Service and Repairs
18238SL Rev B
Summary of Contents for Greensmaster 1018
