Toro 44225, Operator'S Manual

Page: 9 / 32

Note:
When using a forklift to lift the topdresser,
insert the forks through the holes in the rear flap
and into the channels.
Note:
If you are using the optional Lift Assembly
Kit (92-4452) to lift the topdresser, proceed as
follows:
A. Place the lift bracket on top of hopper.
B. Attach the chains to lift eyes on each corner
of hopper.
Important:
When removing the
TopDresser, always remove the
mounting bolts and pins before lifting.
6. Secure each rear mounting bracket to the
vehicle frame with a clevis pin and 2 lynch pins
(
Figure 8 ).
g011401
Figure 8
1. Vehicle frame bracket 3. Clevis pin
2. Mounting brackets 4. Lynch pin
7. Loosely secure the top of each attachment
bracket (
Figure 9 ) or spacer mount ( Figure 10 ) to
the mounting tab on each side of the topdresser
with a 1/2 x 1 inch cap screw, 2 flat washers,
and locknuts. Tighten all fasteners.
g011384
Figure 9
1. Topdresser mounting tab 2. Attachment bracket
g011385
Figure 10
1. Topdresser mounting tab 2. Spacer mount
9