Toro 44225, Operator'S Manual

Page: 26 / 32

Troubleshooting
Problem Possible Cause Corrective Action
1. The hydraulic system is pressurized. 1. Depressurize the hydraulic system.
2. The engine is running. 2. Shut off the engine.
Connecting and/or disconnecting the quick
couplers is difficult.
3. The remote hydraulic valve is
not placed in the float (only on
vehicles with serial numbers prior to
239999999).
3. Place the remote hydraulic valve in the
float.
1. The remote hydraulic valve linkage is
out of adjustment (only on vehicles with
serial numbers prior to 239999999).
1. Adjust the valve linkage.
2. The level of the hydraulic fluid is too
low.
2. Fill the hydraulic fluid to the proper
level.
It is hard to steer the vehicle.
3. The hydraulic fluid is hot. 3. Allow the hydraulic system to cool.
1. A fitting is loose. 1. Tighten the fitting.
The hydraulic system is leaking.
2. A fitting is missing an O-ring. 2. Install the proper O-ring.
1. The quick couplers are not fully
engaged.
1. Check and correct the quick couplers.
2. The quick couplers are interchanged. 2. Check and correct the quick couplers.
The attachment does not function.
3. A belt is slipping. 3. Check and adjust the belt tension.
26