Toro 44225, Operator'S Manual

Page: 6 / 32

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
No parts required
–
Remove the 2/3 or full bed.
Attachment bracket 2
Clevis pin 2
Lynch pin 4
Cap screw (1/2 x 1 inch) 4
Flat washer 8
Locknut (1/2 inch) 4
2
Spacer mount 2
Mount the topdresser.
Cylinder pin 2
Cap screw (1/4 x 3/4 inch) 2
3
Locknut (1/4 inch) 2
Connect the lift cylinders.
4
Bed support (supplied with Workman
vehicle)
–
Using the bed support.
5
No parts required
–
Connect the hydraulic couplers.
Media and Additional Parts
Description Qty. Use
Operator's Manual 1 Read before operating.
6