manualshive.com logo in svg

TIPTEL .comPact 42 IP 8, Installation Manual, Page: 91 / 136

Share
Download
TIPTEL .comPact 42 IP 8 Installation Manual Download Page 91

Menu: Subscriber 

91 

box is called. The hands-free mode is not automatically activated when the 
handset is lifted. 

 

LED flashing=> an incoming call for the voicemail box 

Action:      Pressing the key activates the hands-free mode, and the incom-
ing call is picked up. The hands-free mode is not automatically activated 
when the handset is lifted. 

Voicemail box status warning 

You can set a display to notify you when your voicemail box is full. 

 

LED off =>  

All incoming messages in the voicemail box are deleted 

(voicemail box empty). 
Action:   Pressing the key activates the hands-free mode and your voicemail 
box is called. The hands-free mode is not automatically activated when the 
handset is lifted. Now, parameters in your voicemail box can be pro-
grammed. For information on the functions available in your voicemail sys-
tem, please refer to the „Remote query” chapter in the corresponding User's 
Manual. 

 

LED on =>  

messages already played back are available in the voice-

mail box 
Action:   Pressing the key activates the hands-free mode and your voicemail 
box is called. The hands-free mode is not automatically activated when the 
handset is lifted. It is now possible, for example, to playback or to delete ex-
isting messages. For information on the functions available in your voicemail 
system, please refer to the „Remote query” chapter in the corresponding 
User's Manual. 

 

LED flashing=> The voicemail box is full and the voicemail box has been 

deactivated or set to the „announcement-only mode” (if outgoing message 
1 has been programmed as ‘announcement-only’). 
Action:   Pressing the key activates the hands-free mode and your voicemail 
box is called. The hands-free mode is not automatically activated when the 
handset is lifted. It is necessary to delete incoming messages. For informa-
tion on the functions available in your voicemail system, please refer to the 
„Remote query” chapter in the corresponding User's Manual. 

Free macro key 

This setting allows the user to free up the corresponding function key for individual 
assignment. In contrast to the abovementioned system functions, the assignment de-
termined by the user is only saved in the telephone and has to be re-entered if the 
device is exchanged. 

Recording 

You can record the current call by pressing this function button. 

Summary of Contents for .comPact 42 IP 8









































































































































Reviews:

No comments