manualshive.com logo in svg

TIPTEL .comPact 42 IP 8, Installation Manual, Page: 11 / 136

Share
Download
TIPTEL .comPact 42 IP 8 Installation Manual Download Page 11

Notes 

11 

Directions for the operation of the telephone system  

 

This ISDN telephone system has been designed for use at ISDN connec-

tions according to Euro ISDN protocol DSS1. Using the system on other 
connections can cause malfunctions. 

 

This ISDN telephone system has been designed and manufactured in ac-

cordance with the „Information Technology Equipment Safety” standard (EN 
60950). Only devices complying with this or an equivalent directive may be 
connected to this ISDN telephone system. 

 

Installation procedures must be carried out by a professional. Installation 

procedures on the 230v mains network must be carried out by a qualified 
electrician. VDE 0100 must be observed. 

 

In case of any malfunction, please disconnect the unit from the line and de-

tach all ISDN connection cables. 

 

The ISDN telephone system may not be installed and operated in the follow-

ing environments: 

 

outdoors 

 

in damp or wet rooms (bathroom, shower, swimming pool...) 

 

in surroundings prone to risk of explosion 

 

in locations exposed to direct sunlight 

 

at ambient temperatures below 0 °C or above 40 °C 

 

in locations subject to severe shaking or vibration 

 

in dusty areas 

 

Lay the connecting cables carefully to avoid any danger of tripping. The 

connecting cables must not be subjected to excessive pulling or bending or 
mechanical loading. All connecting cables must only be used indoors.   

Summary of Contents for .comPact 42 IP 8









































































































































Reviews:

No comments