manualshive.com logo in svg

TIPTEL .comPact 42 IP 8, Installation Manual, Page: 14 / 136

Share
Download
TIPTEL .comPact 42 IP 8 Installation Manual Download Page 14

Interfaces 

14 

ISDN-ports (S0) 

 

S

0

  external:  

Connection to a point-to-point or multipoint interface according to Euro 
ISDN (DSS1) 

 

S

0

 internal (not included in tiptel.com 410, tiptel.com 810 and tiptel 41 

Home): 

Connection to multipoint interface for ISDN devices according to Euro ISDN 
(DSS1) 

Analogue ports (a/b) 

The system provides Western-jacks for the first 4 analogue extension ports. In order 
to be able to use the screwing terminals the cover has to be removed. For details 
please see chapter „Installation“. Ports 5 through 8 are only available as screwing 
terminals.  

You can connect analogue telephones, cordless telephones, answering machines, 
and fax machines with the first 4 ports via western jacks or screwing terminals. 
TIPTEL strongly recommends not to us more then one terminal at the same port. 
Those terminals would comprise a parallel circuit which makes it impossible to call 
them individually. Also malfunctions might occur (terminals do not ring anymore, 
caller's numbers are not be displayed, low volume). Please use a separate port for 
each terminal.   

Analogue FXO ports  

This telephone system is ready for installation of an optional FXO-Module. Close to 
the cable bushing for the power cord there are two extra western jacks. With no FXO-
Module installed, these jacks are not operable. 

Network connection 

The telephone system comprises one 10/100 Ethernet connector. Connection is es-
tablished via a standard Ethernet cable (CAT 5). Cross-over will be detected auto-
matically and switched accordingly.  

Summary of Contents for .comPact 42 IP 8









































































































































Reviews:

No comments