manualshive.com logo in svg

TIPTEL .comPact 42 IP 8, Installation Manual, Page: 90 / 136

Share
Download
TIPTEL .comPact 42 IP 8 Installation Manual Download Page 90

Menu: Subscriber 

90 

Day/night switching 

Here you can stipulate the individual profiles for day/night switching on the buttons of 
your system telephone. When making the selection, please note that the selected 
profile and day/night switching must be activated in advance for the function. 

 

LED on => the corresponding profile is activated 

 

Action: none 

 

LED off => the corresponding profile is not activated 

 

Action: Pressing the button activates the profile. 

Voicemail box status on / off 

The LED displays the relevant status of your voicemail box. 

 

LED on =>  

  your voicemail box is active.  

If the subscriber is busy or does not accept the call within 15 seconds, your 
voicemail box answers the call. 

 

 

Action: Pressing the key switches the voicemail box off. All incoming calls 

are exclusively signalled on the subscriber’s phone. 

 

LED off =>  

   your voicemail box is not active.  

All incoming calls are exclusively signalled on the subscriber’s phone.  

 

Action: Pressing the key activates the voicemail box. If the subscriber then is 

busy or does not accept the call within 15 seconds, the call is accepted by 
the voicemail box.  

 

LED flashing => new incoming messages available in the voicemail box  

Action: Pressing the key activates the hands-free mode and your voicemail 
box is called. Refer to the „Remote query” chapter in the appropriate User's 
Manual for information on the functions of your voicemail system that are 
available now. The hands-free mode is not automatically activated when the 
handset is lifted. Note: If there are new incoming messages in the voicemail 
box it cannot be switched off. This ensures that messages are always heard. 
In addition the voicemail box may receive other calls during the query (sub-
scriber is finally busy). 

Voicemail box pick-up 

The pick-up option for the subscriber’s voicemail box is activated here. The status is 
indicated by the LED as follows:  

 

LED on =>  

   the voicemail box has accepted an incoming call 

Action:     Pressing the key activates the hands-free mode and the call is 
picked up from the voicemail box. The hands-free mode is not automatically 
activated when the handset is lifted. 

 

LED off =>  

   idle state 

Action:      Pressing the key activates the hands-free mode and the voicemail 

Summary of Contents for .comPact 42 IP 8









































































































































Reviews:

No comments