manualshive.com logo in svg

TIPTEL .comPact 42 IP 8, Installation Manual, Page: 82 / 136

Share
Download
TIPTEL .comPact 42 IP 8 Installation Manual Download Page 82

Menu: Subscriber 

82 

Allocation for incoming external calls 

Here you can set which external MSNs or DDIs are used to call the subscriber. Sim-
ply select the desired MSNs in the table that is displayed. Requirement: entry of ex-
ternal MSNs in menu „ISDN-access“ (see above). 

Allocation for outgoing external calls 

Here you have the option to choose between „random” and „according to allocation 
table”. If you select „random”, an outgoing call will be routed through any random S0 
port. If you select „according to allocation table”, an outgoing call will be routed via 
the defined S0 port with the selected MSN.  

It is also possible to select several S0 ports. In this case, the selection is made ac-
cording to the order that was specified. First, the dialling procedure is initiated via the 
S0 marked „1”. If this S0 is in use, the dialling procedure is initiated via the S0 
marked „2”. The possible settings depend on the number of external ports and will 
be of concern with optional modules such as a 2 a/b FXO-Module or a VoIP-Module. 

External PABX dial in (call through / call back) 

It is possible to realise remote access to your telephone system. After dialling-in, a 
standard internal dialling tone can be heard. A certain extension or an external sub-
scriber can be called via DTMF. 

All authorisations correspond to your subscriber configuration. Even keypad func-
tions, such as call forwarding via the key sequence 



destination 

 are possi-

ble. . If you are using a tiptel VCM-Module, you may also directly reach and query 
your personal voicemail box. 

Note: 

This service has to be configured in advance under „Set-up service”.  

Call-back number 

If you already know which external connection should be used to dial into the tele-
phone system (e. g. calling the telephone system with a mobile phone), it is recom-
mended to enter the appropriate call number in this menu. If this phone number is 
transmitted as CLIP data, access to the telephone system will be available after the 
dialling-in process. In this case, it is not necessary to enter the PIN code.  

PIN 

A four-digit PIN code has to be entered here. You will hear a request tone after dial-
ling up the telephone system. Now enter the four digit PIN plus # (e.g. 1234#). The 

Summary of Contents for .comPact 42 IP 8









































































































































Reviews:

No comments