manualshive.com logo in svg

TIPTEL .comPact 42 IP 8, Installation Manual, Page: 16 / 136

Share
Download
TIPTEL .comPact 42 IP 8 Installation Manual Download Page 16

First start-up 

16 

First start-up  

This telephone system has been designed as a Plug & Play device, i.e. after connect-
ing the terminals, connecting the telephone system to the mains supply and switch-
ing on the power supply, the system is ready to use. In case you wish to operate the 
system at a point-to-point connection please dial 



 from any 

phone.  

There is a difference between configuring the telephone system, e.g. by an adminis-
trator, and configuring by individual subscribers. The administrator defines subscrib-
ers by assigning call numbers. Using this call number or the user’s name and a 
password, the subscriber can edit personal settings (e.g. set call forwarding) via a 
browser.  But only the administrator also defines the extensions for signalling and 
which external MSNs are available. 

Your telephone system has the following factory default settings (the following list is 
not complete and only gives the settings necessary for configuration. 

 

External S0 configured for Euro-ISDN point-multipoint and PP connection 

(DSS1). 

 

All calls will be signalled at all subscribers. 

 

Only tiptel.com 411, 811, tiptel.comPact 42/82 IP 8 and tiptel 42 Home:  

The internal S0 is configured for the Euro ISDN multipoint interface. 
Subscribers (MSNs) 20 – 21 are preset.   

 

The analogue extensions 1 – 8 are assigned to subscribers 50 – 57. 

 

All subscribers have international exchange authorisation. 

 

Standard exchange connection with the digit 



. 

 

Charges are only displayed on ISDN terminals, not at analogue terminals. 

 

The PIN (needed for important programming codes) is preset to 0000. 

 

The Ethernet address is preset to 192.168.34.100. 

 

The subnet mask is preset to 255.255.255.0. 

 

The basic DHCP address is 192.168.34.100. 

 

The username/password for the web-based configuration is admin/admin. 

 

Note: 

To enable full functionality of your ISDN terminal units you will have to 
assign MSNs to them. The desired (and configured in the telephone 
system) subscriber's telephone number is to be used as MSN for the 
individual subscriber. For details on assigning those MSNs please con-
sult the User's Manual for your ISDN terminal units. 

Summary of Contents for .comPact 42 IP 8









































































































































Reviews:

No comments