Operation
XD 7500
154
ba77191e01 - 71310060
04/2018
Update folder contains several subfolders.
The following steps are carried out at the photometer.
4.20.2
Remote functions
The photometer has a programming interface for remote control. More
detailed information on this is available on request from the manufacturer.
The photometer can also process a script file stored on a USB flash drive.
This function is among the general settings of the photometer. More detailed
information on the function and the requirements of the script file is available
on request from the manufacturer.
3
Connect the USB memory device
to the photometer.
4
Switch on the photometer if nec-
essary.
5
Using
<
><
>
, select
USB
memory device
as the source and
press
<START·ENTER>
.
The update process takes approx.
five minutes.
The photometer switches itself off
and then on again.
If the update cannot be carried out, an error message is dis-
played.
Check whether the "Update" folder with its subfolders is stored
on the USB memory device (top level).
If on the photometer there is not enough free memory capacity
for the update, you can create memory capacity by erasing mea-
surement data. Save your data to a USB memory device before
erasing them on the photometer.
<HOME>
[General setup]
–
Software/methods update
Software/methods update
16.01.17 9:52
Software/methods update
Quelle der Update-Daten wählen:
USB memory device
Cancel
