XD 7500
Operation
149
ba77191e01 - 71310060
04/2018
4.16.4
Login with active user management
To be able to always assign measurement data to a user, the administrator
can activate the user management function. After doing so, the photometer
can only be operated after login with a user name. Depending on the autho-
rization class (administrator, user, guest), important settings are released for
changes or locked.
Activating the user management creates an administrator user account. The
user name is "Administrator". The preset password is "admin".
Change this password as soon as possible.
Make sure to use the correct spelling (upper and lower case) of user name
and password for the login.
After logging in to the
Administrator
group with a user name, you can create
further users or administrators or switch off the user management function.
The
Login
window with the
Enter user name
prompt appears after the meter
has been switched on and after a user has logged off.
In the following example, a user will log in with the user name, "Administra-
tor".
The user management function is not active in the delivery con-
dition of the XD 7500. Every user can carry out all functions.
The photometer is switched on.
The
Login
dialog is displayed.
1
Enter the user name (
<A...9>
)
and confirm.
The input field for the password
pops up.
If the user name is not known (or
incorrectly spelled) it is possible to
log in without a password as a
guest with restricted rights (see
Section 4.16.1).
Login
16.01.17 9:52
Enter user name
Administrator
