28 - 40
iCAT
MU-iCAT-1120
a
Check
Replacement
Greasing
Cleaning
To ensure the safety at any time during the use of the atomizer, the operator is required to perform the substitutions of the
components listed below:
Component Replacement frequency
- Hydraulic pipes
Every 2 years or 400 hours
To get the best performance from the Air Sprayer and to ensure the maximum life of all the parts, it is necessary that the provisions
of Operation and Maintenance are scrupulously followed by the Air Sprayer operators.
It is therefore advisable to read these notes and consult the manual every time you need a suggestion to eliminate any
inconvenience.
For further information, please contact our Service Centres or directly contact:
Tifone Ambiente s.r.l. - Via Modena, 248a - 44044 Cassana - (FE) - Italia
Tel. +39 0532 730 586 - Fax. +39 0532 730 588
http://www.tifone.com - e-mail: [email protected]
At the end of each spraying, clean from debris and dirt the input
filter (a) which is located within the hatch of the Air Sprayer tank.
Also check the integrity of the filter and replace it if necessary.
6 - MAINTENANCE
6.3
MAINTENANCE AT THE END OF EACH SPRAYING
6.1
SCHEDULED MAINTENANCE TABLE
6.2
PERIODIC REPLACEMENT OF THE SAFETY ITEMS
6.3.1
Input filter cleaning
ATTENTION: The maintenance operations must be carried out exclusively by the Customer Service Department
of TIFONE AMBIENTE Srl or by qualified personnel.
Before performing any maintenance on the Air Sprayer, read the chapter on the safety instructions.
Cleaning residue must be disposed of according to the laws in force.
WARNING: For maintenance operations of the internal combustion engine, read the use and maintenance
manual of the engine itself attached to the machine.
DANGER: All maintenance operations must be carried out with the atomizer engine off and with the Air Sprayer
placed on a stable and secure surface.
Be careful to relieve the pressure inside the circuit, taking care, before turning off the Air Sprayer, to bring the
pressure to the minimum value.
Always use protective clothing.
Always have a fire extinguisher handy when you refuel.
Maintenance
As required
Every
day
End of
treatments
Hours
10
30
50
100
500
Pump oil
Liquid leaks
Safety parts and warning labels
Engine fuel
Engine oil
Engine suction filter
Input filter
Water suction filter
Circuit washing
Equipment cleaning
Nozzle check
Greasing and lubrication
