MU-iCAT-1120
iCAT
23 - 40
b
a
b
c
a
a
To fill the circuit washing tank:
- open the cover (a).
- fill the tank with clean water until the necessary capacity has
been reached.
- Tank filling can be performed from elevated water tanks or
from water sources, always respecting the Environment Anti-
pollution Rules.
To wash hands or face in case of contact with antiparasitic
products, use the handwash tank (a).
The tank is fitted with a tap (b).
To fill the water tank:
- open the cover (a) and verify that the hatch filter (b) of the Air
Sprayer is in place.
- fill the tank until reaching the necessary capacity (the level in
the tank is displayed in the indicator (c));
- Do not introduce into the tank an amount exceeding its rated
capacity in order to prevent any leakage of fluid into the
environment;
- tank filling can be performed from elevated water tanks or
from water sources, always respecting the Environment Anti-
pollution Rules.
5.3
TANK FILLING
5.3.1
Mixture tank filling
5.3.2
Circuit washing tank filling
5.3.3
Handwash tank
ATTENTION: The law prohibits the use of aspirating fillers connected to the machine for the suction from ditches,
waterways and public water systems.
If the above instructions are not respected, there is a residual risk of environmental contamination.
ATTENTION: The tank must only be filled with clean and not contaminated water.
