Chapter 4: Using the web interface
98-129217-A
Setting up the interfaces
73
Setting up the connection to the Thrane IP Handset
Overview
By default, the handset is automatically connected at startup, so no configuration is necessary!
The terminal is set up to assign the user name 0501 and the password 0501 to the Thrane IP
Handset when it is connected.
However, you may want to change the password or access the internal web interface of the IP
handset.
Changing the terminal’s settings for your Thrane IP handset
To change the settings for the IP handset, do as follows:
1.
If the Thrane IP Handset has not been connected to the terminal before, connect the IP
handset to one of the LAN ports (preferably port 1) in the terminal.
2.
In the web interface select
SETTINGS > IP handsets
.
3.
Select
Edit
next to the handset to change the password of the handset.
Remember that you must enter the same password in the IP handset. For details, see the next
section
Setting up the Thrane IP handset to match the terminal
4.
Select
Delete
next to the handset to delete it from the list.
When the handset is deleted, you can no longer access the terminal with this handset.
