Chapter 4: Using the web interface
98-129217-A
Setting up the interfaces
61
• Type in the MAC address in the MAC address field at the top of the page. An asterisk
indicates a “wild card”, which means any MAC address is accepted.
IP address:
If you want a specific IP address to belong to Group 0, type in the IP address in the
IP address field. If the field is left empty, any IP address is accepted.
LAN port:
If you want devices connected to a specific LAN port to belong to Group 0, select the
port number to use.
15. Click
Apply
.
Group 0 is now added to the network classification table.
This means that when both network user groups are enabled, the terminal will first search for
a device that matches the criteria set up in the network classification table for Group 0 and
assign the Bridge mode connection to this device if possible. If no device matches these
criteria, the Default network user group will be used. Note however that only one of the
network user groups can have Internet access.
16. Reboot the terminal for the changes to take effect.
You should now be able to use your Bridge mode connection. By default, the connection is
automatically activated when the terminal is ready and online, and a matching device is found.