Thrane&Thrane SAILOR 150, User Manual

Page: 36 / 128

Chapter 3: Operating the system
98-129217-A Using a computer 28
Using a computer
Interfaces
The terminal has two LAN connectors for connecting computers, the Thrane IP Handset or other
LAN equipment.
For information on how to connect to the interfaces, see the installation manual for the
SAILOR 150 FleetBroadband system.
Working with network user groups
Two network user groups are available to the users of the terminal:
•
The Default group
: By default, all users belong to the Default network user group, which
provides a shared Standard connection to the Internet using the built-in router functionality of
the terminal. This group does not allow Bridge mode.
•
Group 0
: A second group used for Bridge mode connection (Bridge mode is an exclusive
connection, with NAT disabled in the terminal). With Group 0 the Internet connection is
automatically established when the system is ready for transmission.
If you want to have a direct Bridge mode connection use this network user group.
For further details, see Setting up the LAN network on page 54.
Connecting to the Internet
Default setup
By default, any IP device that is connected to the terminal belongs to the
Default
network user
group. It uses a Standard shared IP connection, which you must manually activate from the web
interface. For further information on network user groups, see
Setting up a Bridge mode
connection on page 57 and Setting up the Default network user group on page 55.