Chapter 4: Using the web interface
98-129217-A
Setting up the interfaces
64
Enabling PPPoE (Point-to-Point Protocol over Ethernet)
What is PPPoE
By using PPPoE, users can virtually “dial” from one machine to another over an Ethernet network,
establish a point to point connection between them and then securely transport data packets over
the connection.
On the equipment connected to the SAILOR 150 FleetBroadband terminal you must enter a few
settings for your PPPoE connection. For example you need to set up which service to use and
possibly a user name and password. For details, refer to the documentation for your equipment.
On the SAILOR 150 FleetBroadband terminal you must enable PPPoE before you can establish a
PPPoE connection.
Enabling PPPoE in the SAILOR 150 FleetBroadband terminal
To enable PPPoE in the terminal do as follows:
1.
Select
SETTINGS > LAN > PPPoE
.
2.
Select
Enabled
.
3.
Click
Apply
.