Thrane&Thrane SAILOR 150 User Manual Download Page 103

Page: 103 / 128

Chapter 4: Using the web interface

98-129217-A

Site map

Extended status

To view updated information on the

Extended status page

, click

Refresh

The Extended Status page shows the following information:

•

The antenna type (must always be TT-3050C).

•

The status of the connection to the air interface (IAI-2). This field should normally show
“Registered”, unless the system is still in the startup process.

•

Ongoing data sessions (IP address) and connection status, e.g. Active or Suspended.

•

Ongoing calls and their connection status.

Site map

The web interface also offers a site map page. Use this page to get an overview of the submenus.

To access the site map, select

SITE MAP

from the left navigation pane.

Click on items in the site map to go directly to the relevant location.

Summary of Contents for SAILOR 150

































































































































Search results

Summary of Contents for SAILOR 150

Reviews:

Related manuals for SAILOR 150

Brands by name

Popular brands

Thrane&Thrane SAILOR 150, User Manual

Search results

Summary of Contents for SAILOR 150

Reviews:

Related manuals for SAILOR 150

Brands by name

Popular brands