manualshive.com logo in svg

ThermoFisher Scientific Ozone Primary Standard 49iQPS, Instruction Manual

Share
Download
ThermoFisher Scientific Ozone Primary Standard 49iQPS Instruction Manual Download Page 131

Operation 

Settings 

Thermo Scientific 

49iQPS Instruction Manual     

3-107

 

 

The Download Data To USB Drive screen allows the user to 
download/upload data to/from the USB drive. 

Home Screen>Settings>USB Drive>Download Data To USB Drive

 

 

The Download Data to USB Drive screen contains the following 
information: 

●

 

Download Health Check Report:

 Includes status and alarms, preventive 

maintenance, and maintenance history. 

●

 

Download Entire Data Log:

 Includes the entire data log (from data 

logging). 

●

 

Download Service Log:

 Includes a complete listing of data for all 

variables. This is set at the factory. 

●

 

Download System Log:

 Consists of system log text files, which include a 

listing of system errors. 

●

 

Download Calibration History:

 Includes the data in the calibration 

history screen. 

●

 

Download Configuration Data Backup to USB:

 Allows the user to 

download the configuration file from the instrument to the USB. 

●

 

Upload Configuration Data Restore from USB:

 Allows the user to upload 

the configuration files from the USB to the instrument. 

●

 

Restore:

 Allows the user to upload the configuration files from the USB 

to the instrument. 

●

 

Download All Data:

 Downloads all reports, logs, histories, and backup 

information. 

Download Data To USB

Drive

Summary of Contents for Ozone Primary Standard 49iQPS

































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands