EN-43
Thermo Scientific Orion Star
™
and Star Plus Meter User Guide
Conductivity Temperature Display and Calibration
Conductivity Temperature Display
Star Plus meters allow the temperature to be viewed on individual measurement
lines in addition to the temperature display on the top, left of the screen .
1 . In the measurement mode, press
to choose the middle display line .
The arrow icon will point to the selected line .
2 . Press
/
to change the value on the selected line . The middle line can
be changed to display conductivity (µS/cm or mS/cm), total dissolved solids
(mg/L), salinity (ppt), resistivity (MΩ-cm), temperature (no icon) or a blank line .
Conductivity Temperature Calibration
The temperature calibration mode of the Star Plus meter allows the temperature
on each measurement line to be manually adjusted .
1 . In the measurement mode, press
to choose the middle measurement line
and press
/
until the temperature is shown for the selected line .
2 . Press
to begin the calibration .
3 . When the reading stabilizes, the arrow icon and the first digit will flash .
Enter the temperature by pressing
/
to adjust each digit and
to
move to the next digit .
4 . Press
to save and end the calibration .
Conductivity Technique
Summary of Contents for Orion Star
Page 367: ......
