EN-17
Thermo Scientific Orion Star
™
and Star Plus Meter User Guide
Selecting the Measurement Parameter
In the measurement mode, the arrow icon on the left side of the display indicates
the active line . Press
to move the arrow icon to the desired measurement line
and press
/
to scroll through the measurement parameters associated with
the selected line .
The measurement lines and icons for the 5-Star multi-parameter meter are shown
below . The single and dual parameter meters will have fewer measurement lines
and icons, depending on the meter capabilities .
pH
mV
RmV
ISE
No icon for temperature
No icon and no measurement – the measurement line is turned off
μS/cm
or
mS/cm
for conductivity
mg/L
for TDS
ppt
for salinity
MΩ-cm
for resistivity
No icon for temperature
No icon and no measurement – the measurement line is turned off
% sat
for dissolved oxygen percent saturation
mg/L
for dissolved oxygen concentration
No icon for barometric pressure
No icon for sample temperature
No icon for membrane temperature (polarographic DO readings only)
No icon and no measurement – the measurement line is turned off
Note:
If a measurement line is not needed, press
to move the arrow
icon to the measurement line that is not needed and press
/
until the
measurement line is completely blank.
Meter Setup
Summary of Contents for Orion Star
Page 367: ......
