Thermo Scientific Orion Star, User Manual

Page: 19 / 368

EN-13 Thermo Scientific Orion Star
™
and Star Plus Meter User Guide
Top Line Middle Line Bottom Line Setup Menu Description (default setting, method specific)
rEAd tyPE AUt0, tImE, C0nt, Measurement read type as AUTO-READ, timed or continuous
(AUt0, yes)
rEAd tInE 00:05 to 99:59 Timed measurement value in minutes and seconds (01:00, yes)
Note: This submenu is only available when the timed
measurement read type is selected.
L0g dEL n0, YES Delete datalog after download option, select YES to delete the
datalog when it is downloaded or select nO to overwrite the oldest
data when the datalog is full and not delete the datalog when
it is downloaded
(n0, yes)
L0g AUt0 0FF, 0n Automatic datalog point saving option (0FF, yes)
gEn dEgC -5.0 to 105 Manual temperature value (25.0, yes)
gEn StIr 0FF, 1, 2, 3, 4, 5, 6, 7 Stirrer speed – 3, 4 and 5 Star benchtop meters only (4, yes)
gEn PASS 0000 to 9999 Meter password entry (0000, yes)
gEn AUt0 0n, 0FF Automatic meter shutoff option
(0n, no)
gLP SEt 0FF, 0n GLP option, GLP feature enables or disables methods (0FF, no)
dAtE H0Ur HH00 to HH23 Hour setting (HH12, no)
dAtE tInE mm00 to mm59 Minute setting (mm00, no)
dAtE tYPE mdY, dmY Date format as month, day, year or day, month, year (mdY, no)
dAtE YEAr 2000 to 2099 Year setting
(2004, no)
dAtE dAtE mm01 to mm12 Month setting (mm01, no)
dAtE dAY dd01 to dd31 Day of the month setting (dd01, no)
r232 bAUd 1200, 2400, 4800, 9600 Baud rate setting (9600, no)
r232 0UtF Prnt, C0mP Output format for printer or computer, COmP format is comma
delimited
(Prnt, no)
AUt0 SAPL 0FF, 0n Autosampler – 3, 4 and 5 Star Plus benchtop meters only
(OFF, no)
AUt0 trAY 28, 48 Beaker tray setting
(28, no)
AUt0 rInb 1, 2, 3, 4, 5 Number of rinse beakers (3, no)
AUt0 rSEC 5 to 60 Rinse time in each rinse beaker, seconds (10, no)
AUt0 PH 0, 1, 2, 3 pH calibration points (3, no)
AUt0 0rP n0, YES ORP calibration option, appears if 0 was selected for PH (n0, no)
AUt0 ISE 0, 2, 3 ISE calibration points, appears if 0 was selected for PH
(2, no)
1 AUt0 ISE1 Concentration value of ISE standard 1, appears if 2 or 3 was
selected for the ISE calibration points
(1, no)
10 AUt0 ISE2 Concentration value of ISE standard 1, appears if 2 or 3 was
selected for the ISE calibration points
(10, no)
100 AUt0 ISE3 Concentration value of ISE standard 1, appears if 3 was selected
for the ISE calibration points
(100, no)
AUt0 C0nd 0, 1, 2, 3 Conductivity calibration points (3, no)
AUt0 n0SA 0 to 47 Number of sample beakers
(1, no)
Meter Setup