15
Scanning
Setting Up Test Parameters
66
Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis
Thermo Scientific
The parameters for the selected test appear.
This screen provides these capabilities:
•
• Setting up Cell Correction
Setting Up Test Parameters
To set up test parameters
1. Highlight the desired parameter.
2. When the parameters are set, press
Save Test
to save the test or
Run Test
to measure a
blank or a sample.
Collecting a Baseline Scan
To collect a baseline scan
1. Press
Run Test
.
Note
If Cell Correction is ON, you must run the Setup Correction application before
you can access Run Test or Measure Samples.
Note
If Auto Save Data is ON, you must enter a Data File Name before you can
access Run Test or Measure Samples.
Note
If a 6-Position Cell Holder is installed, be sure to place the blank in the B position.
The instrument always uses the B position to collect the baseline.
