manualshive.com logo in svg

Thermo Scientific Orion AquaMate 7000 Vis, User Manual

Share
Download
Thermo Scientific Orion AquaMate 7000 Vis User Manual Download Page 117

Thermo Scientific

Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis

107

22

Performance Verification

Performance Verification lets you check the performance of your instrument with these tests: 

•

Wavelength Accuracy - Internal

•

Wavelength Accuracy - Standard

•

Wavelength Repeatability (UV-Vis only)

•

Resolution (UV-Vis only)

•

Photometric Accuracy

•

Noise

•

Stray Light

Run the appropriate tests regularly and maintain a log of results to help document the 
reliability of the instrument and indicate potential performance issues.

Accessing the Performance Verification Tests

To access the Performance Verification tests

1. Press 

Tests

.

2. Highlight 

Performance Verification

 and press 

Enter

.

Note  

If a printer is installed and turned on, the instrument automatically prints test 

results. You can also press 

Print

 to print another copy of the results.

Summary of Contents for Orion AquaMate 7000 Vis





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands