MAX/Wall
®
Technical Wall System
21
3.5 End Closure Panels
Tools Required:
9/16" wrench or socket
Jigsaw with metal cutting blade
Hardware Included:
Bag No. 831976, consisting of:
4 HHCS, 3/8-16 x 2-1/2" Grade 5
4 Nuts, 3/8-16
2 Offset Plates
8 Washers
Procedure:
1. Fasten end of wall core to floor clamp using 3/8-
16 x 2-1/2" HHCS. Offset plate should be under
the head of the 3/8" screw and on the outside of
the riser. See Figure 3-6.
2. Refer to
Installing Floor Clamp
instructions.
Repeat for top of wall.
Note:
If base molding is required, add base
molding floor channel at this time.
See
Attaching Base Molding Supports.
3. Attach end closure panel by hooking
panel over offset plates. Press down firmly.
See Figure 3-10.
Section 3 – Installing Wall Frames
Figure 3-10
3/8-16 x
2-1/2"
HHCS
3/8" Washer
3/8 Nut
Floor Clamp
Offset Plate
End
Closure
Panel
3/8" Washer
3/8-16 x 2-1/2" HHCS
3/8" Washer
3/8 Nut
3/8" Washer
Summary of Contents for FISHER HAMILTON MAX/WALL
Page 1: ......
Page 58: ...MAX Wall Technical Wall System 58...