MAX/Wall
®
Technical Wall System
36
Section 4 – Installing Supporting Furniture and Casework
4.2 Cantilever Table to Wall
Frame
(cont.)
Refer to Figure 4.3
6. When the cantilever tables are installed next to
each other and at the same height, they must be
bolted together. Insert a 5/16-18 x 3-1/2" bolt
through the holes at the front of the cantilever
frames and secure with a 5/16-18 nut.
Note:
Washers are provided to shim between the
cantilevered legs if necessary.
Refer to Figure 4.4
7. Attach the work surface to the
table frame using top brackets and
No. 10 x 1" screws. Top brackets
are hooked onto "C" channels at
the front of the table frame.
Location and number of clamps
to be used is dependent upon
the number of holes pre-drilled into
the work surface.
Figure 4-3 Bolting Cantilever Frames Together
Figure 4-4 Attaching Work Surface to Cantilever Frame
Cantilever
Frame
Wall Frame Assemblies
5/16-18 Nut
5/16-18 x 3-1/2" Bolt
10 x 1"
Screw
Cantilever Frame
Table Top
Wall Frame
Cantilever Frame
Table Top
Top
Bracket
C-Channel
Summary of Contents for FISHER HAMILTON MAX/WALL
Page 1: ......
Page 58: ...MAX Wall Technical Wall System 58...