MAX/Wall
®
Technical Wall System
42
Cantilever Frame
Work Surface
Corner Support
Riser
Extrusion
Section 4 – Installing Supporting Furniture and Casework
4.5 Corner Table Support for
Cantilever Work Surface or
Structural Table
Tools Required:
1/2" and 9/16" combination wrenches
Rubber mallet
Phillips head screwdriver
Hardware Included:
Product No. 900H135 consisting of:
1 Right-hand corner support
1 Left-hand corner support
Note:
Front corner supports are used only when
the work surface is equal to or deeper than the side
support structure.
Work Surface
Width of Side Frame
Depth
to be Used
24"
24"
30"
24" or 30"
See Figure 4-10.
1. Insert the hooks of the corner support into the
slots in the frame.
See Figure 4-11.
The corner support should be placed 2-3/8" below
the top of the work surface.
Note:
Make sure the corner support is securely
hooked to the side frame by striking the corner
support with a rubber mallet.
2. Attach the corner work surface to the back
frame. Corner support will capture the front
corner of the cantilever frame.
Figure 4-11 Corner Table Support Detail
Cantilever Frame
Wall Frame
Wall Frame
Left Hand
Corner Support
Riser
Extrusion
Figure 4-10 Attaching Corner Table Support
2.375"
from Work
Surface to
Support
Summary of Contents for FISHER HAMILTON MAX/WALL
Page 1: ......
Page 58: ...MAX Wall Technical Wall System 58...
