MAX/Wall
®
Technical Wall System
22
Section 3 – Installing Wall Frames
3.5 End Closure Panels
(Cont.)
4. To attach ceiling end panel, trim panel to fit
between top of wall and ceiling. Align panel with
lower end closure panel. Fasten to ceiling
extension with four 10 x 5/8" PPHSMS.
3.6 Joining Wall Frames
Tools Required:
Socket set with 9/16" socket
9/16" Combination wrench
Facing insert removal tool
Procedure:
Refer to Figure 3-12:
1. Place the wall frames side-by-side.
2. Attach the frames at the base with 3/8-16
x 3-1/2" HHCS, Gr. 5, through the floor
clamp and frames.
3. Attach the frames at the top with 3/8-16
x 3-1/2" HHCS, Gr. 5, through the frames.
Figure 3-11 End Closure Panel
No. 10 X 5/8"
PPHSMS
Ceiling End
Closure Panel
Ceiling Channel
Figure 3-12 Joining Wall Frames
3/8-16 x
3-1/2"
HHCS
3/8" Washer
3/8 Nut
Floor Clamp
floor Anchor Bolt
Wall Frame
3/8" Washer
3/8-16
x 3-1/2"
HHCS
3/8" Washer
3/8 Nut
3/8" Washer
Floor Clamp
Summary of Contents for FISHER HAMILTON MAX/WALL
Page 1: ......
Page 58: ...MAX Wall Technical Wall System 58...
