DensityPRO Specific Parameters
Thermo Fisher Scientific
DensityPRO with
F
OUNDATION
™ fieldbus
Application Guide
C-15
Parameter
Type
R/W
Description
TC_PRIMARY
CON
R/W
The primary time constant.
TEMP_CONSTANT
CON
R/W
The temperature constant in deg C.
TEMP_INPUT_SOURCE
CON
R/W
The source of the temperature input signal.
0 = not used
1 = 100-ohm American RTD
2 = Manual entry
TEMP_OFFSET_CORRECTIO
N
CON R/W
The temperature offset correction in deg C.
USE_TEMP_COMP_ON_STD
CON
R/W
Select whether temperature compensation equation will be used on the
standardization cycle.
0 = no
1 = yes
VOLUME_FLOW_TIME_UNIT
CON
R/W
The time units assigned to the volume flow measurement.
2 = minutes
3 = hours
WKS_SINCE_LAST_STD
CON
R/W
The number of weeks since the last standardization.
XRAY_MAX_HOLD_TIME
CON
R/W
The xray safeguard maximum hold time in seconds.
XRAY_MIN_HOLD_TIME
CON
R/W
The xray safeguard minimum hold time in seconds.
XRAY_MODE
CON
R/W
The xray safeguard mode.
0 = disable xray safeguard
1 = enable xray safeguard
XRAY_THRESHOLD
CON
R/W
The xray safeguard threshold.
Summary of Contents for DensityPRO
