Thermo Scientific DensityPRO, Application Manual

Page: 32 / 101

The NI-FBUS Configurator
Configurator Basics
Figure 3–11. DensityPRO AI block on the FBAP grid
3. Click on the AO block of the other device and drag it to the FBAP
grid.
4. Connect the OUT of the DensityPRO AI block to the CAS IN of the
other device’s AO block. To do this, click the Wiring Tool icon on the
FBAP toolbar. Click on the OUT terminal of the AI block and then
click on the CAS IN terminal of the AO block.
Note
An alternative to wiring blocks together is to use one of the templates
provided by the NI-FBUS Configurator. Reference the NI-FBUS
Configurator user manual for more information. Additional information
on the FBAP tools can also be found in the configurator manual.
▲
5. Check the execution schedule (Loop Time) and make necessary
adjustments.
6. Repeat this process for each loop you want to make. Upon completion,
you can see the schedule in its entirety (view execution order of all the
loops) through the Schedule object in the configuration tree. (For more
information on the Schedule object, reference the configurator user
manual).
3-14 DensityPRO with F
OUNDATION
™ fieldbus Application Guide Thermo Fisher Scientific