Issue: 1.78
Using the ACW for Task Transfer
Thermo Fisher Scientific
A Guide to Using DCS4 Access Control Workstation 6-3
When the ACW is available for RCA Transfer, a message
(similar to the one below) is displayed on the screen:
The Transfer Process is initiated by inserting an EPD into the
ACW.
Note: You may abort the process by selecting ‘CLR’ on the
ACW keypad, this reinstates you under the old Task ID.
If the EPD cannot be read, an error message is displayed:
The Worker is now prompted for their Worker details:
EPD Prompt
Read Error Messages
Identifying the Worker
