Issue: 1.78
Using the ACW for RCA Entry
Thermo Fisher Scientific
A Guide to Using DCS4 Access Control Workstation 4-3
Select the Entry Process from the menu using the Up/Down
buttons and ‘ENT’.
Note: If the ACW has been setup for Auto Entry/Exit process,
the EPD Prompt window is displayed (see
EPD Prompt (page
4-3)
). The system checks whether the EPD has been issued or
not as follows:
1. If the EPD is issued, the system assumes that the EPD needs
to be returned and commences the Exit Process (see
The RCA
Exit Process (page 5-2)
).
2. If the EPD is not issued, the system assumes that the EPD
needs to be issued and commences the Entry Process (see
The
RCA Entry Process (page 4-1)
).
When the ACW is available for RCA Entry, a message (similar
to the one below) is displayed on the screen:
The Entry Process is initiated by inserting an EPD into the
ACW.
If the EPD cannot be read, an error message is displayed:
Selecting the Entry
Process
EPD Prompt
Read EPD Error Messages
