Using the ACW for RCA Entry
Issue: 1.78
4-2 A Guide to Using DCS4 Access Control Workstation
Thermo Fisher Scientific
3.
Entering the Worker details – see
Identifying the
Worker (page 4-4)
.
4.
If the Display Dose on Issue option is enabled in the
ACW Configuration (see
A Guide to Using DCS4
System Administrator Ref No. EPD/MHB/61065/000
),
the Worker's Dose is displayed – see
Displaying the
Dose (page 4-8)
.
5.
If the RCA Escorts option is enabled in the System
Setup AND Escort Required is enabled for the Worker
(see
A Guide to Using DCS4 Data Management and
Reporting Ref No. EPD/MHB/61066/000
), the Escort
Details are entered – see
Escort Details (page 4-9)
.
6.
If Legal Badges must be shown at ACW is enable in the
System Setup (see
A Guide to Using DCS4 Data
Management and Reporting Ref No.
EPD/MHB/61066/000
), the Legal badge is presented –
see
Present the Legal Badge (page 4-11)
.
7.
Entering the Task details – see
Identifying the Task
(page 4-11)
.
8.
If the Confirm Task Accept option is enabled in the
System Setup (see
A Guide to Using DCS4 Data
Management and Reporting Ref No.
EPD/MHB/61066/000
), the Worker Briefed message is
displayed – see
Has Worker been Briefed (page 4-14)
.
9.
If a Mailbox message has been created for the selected
task, the message is displayed – see
Mailbox Message
(page 4-15)
.
10.
The EPD is issued – see
Issuing the EPD (page 4-16)
.
If Display Forename1 instead of Initials at ACW is ticked on
the System Configuration tab of the System Setup screen, the
Worker’s name will be displayed as follows:
If Display Forename1 instead of Initials at ACW is NOT ticked
on the System Configuration tab of the System Setup screen,
the Worker’s name will be displayed as follows:
Throughout this manual, the Initials option has been set.
See
A Guide to Using DCS4 Data Management and Reporting
Ref No. EPD/MHB/61066/000
for further information.
Note regarding the display
of Worker details at the
ACW
