Issue: 1.78
Using the ACW for Dose Display
Thermo Fisher Scientific
A Guide to Using DCS4 Access Control Workstation 7-1
Chapter 7
Using the ACW for Dose Display
Introduction to the RCA Dose Display
Process
Selection of Dose Display does not provide access to the
Radiologically Controlled Area, but it allows workers to see
what doses they have received in their last shift or last visit, in
the current month and in the last year.
Note: If the ACW is in On-Line Mode, the current Shift Dose
is displayed. If the ACW is in Local Mode, the Shift Dose
displays the previous Visit Dose.
The Dose Display Process
The Dose Display Process involves the following steps:
1.
Selecting the Dose Display Process from the main
ACW menu – see
Selecting the Dose Display Process
(page 7-2)
.
2.
Entering the Worker Details – see
Identifying the
Worker (page 7-2)
3.
Displaying the Dose Details – see
Dose Display in On-
Line Mode (page 7-3)
and
Dose Display in Local Mode
(page 7-4)
.
If Display Forename1 instead of Initials at ACW is ticked on
the System Configuration tab of the System Setup screen, the
Worker’s name will be displayed as follows:
If Display Forename1 instead of Initials at ACW is NOT ticked
on the System Configuration tab of the System Setup screen,
the Worker’s name will be displayed as follows:
Note regarding the display
of Worker details at the
ACW
