Using the ACW for RCA Exit
Issue: 1.78
5-4 A Guide to Using DCS4 Access Control Workstation
Thermo Fisher Scientific
The Worker identifies themselves be entering their Primary ID
(see
Notes regarding Worker Prompt Types (page 4-7)
).
The Worker enters
their Primary ID
according to the
System Setup (see
Notes regarding
Worker ID input).
If the Primary ID is entered through the keypad, the following
screen will appear echoing the characters as they are typed in:
Note: The System Administrator can disable the keypad entry
of the Primary ID.
See A Guide to Using DCS4 System
Administrator Ref No. EPD/MHB/61065/000 for more
information.
The System
Administrator sets the
Hide PIN in the
Configuration
program (see A Guide
to Using DCS4 ACW
Manager Ref No.
EPD/MHB/61064/000)
.
Note that the picture above displays the Worker’s Primary ID.
If the Hide PIN is selected, the Worker’s Primary ID is
displayed as follows:
The EPD is checked after the Primary ID is entered for errors
such as not being issued, issued to another worker etc. An error
message giving details of the fault is displayed as follows:
Entering Primary ID
EPD Error Messages
