Using the ACW for Dose Display
Issue: 1.78
7-2 A Guide to Using DCS4 Access Control Workstation
Thermo Fisher Scientific
Throughout this manual, the Initials option has been set.
See
A Guide to Using DCS4 Data Management and Reporting
Ref No. EPD/MHB/61066/000
for further information.
Select the Dose Display Process from the menu using the
Up/Down buttons and ‘ENT’.
The Worker is now prompted for their Worker details:
The Worker identifies themselves by entering their Primary ID
(see
Notes regarding Worker Prompt Types (page 4-7)
).
The Worker enters
their Primary ID
according to the
System Setup (see
Notes regarding
Worker ID Input (page
4-8)
).
If the Primary ID is entered through the keypad, the following
screen will appear echoing the characters as they are typed in:
The System Administrator can disable the keypad entry of the
Primary ID. See
A Guide to Using DCS4 System Administrator
Ref No. EPD/MHB/61065/000
for more information.
Selecting the Dose Display
Process
Identifying the Worker
Entering Primary ID
