Issue: 1.78
Using the ACW for RCA Exit
Thermo Fisher Scientific
A Guide to Using DCS4 Access Control Workstation 5-7
The System
Administrator sets the
Hide PIN in the
Configuration
program (see A Guide
to Using DCS4 ACW
Manager Ref No.
EPD/MHB/61064/000)
.
Note that the picture above does not show the Worker’s PIN as
the Hide PIN is selected. If the Hide PIN is not selected, the
Worker’s PIN is displayed as follows:
When the EPD has been successfully cleared, the following
Return message is displayed indicating that the user may
proceed:
For details regarding
the System Setup, see
A Guide to Using
DCS4 Data
Management and
Reporting Ref No.
EPD/MHB/61066/000
Note that if the
Show Alarm Settings on Issue
is enabled in the
System Setup, the Exit Alarm and Peak Dose for the selected
Task shall be displayed as follows:
Note: If an Audio Card is fitted to the ACW then an audible
message of confirmation will also be given:
See A Guide to Using DCS4 ACW Manager Ref No.
EPD/MHB/61064/000 for further information about setting up
the audio messages.
