Thermo Scientific Corona Veo, Operating Manual

Page: 99 / 262

5 • Installation
Charged Aerosol Detectors Corona Veo (RS) Operating Manual Page 99
♦ Warm-up phase
In the warm-up state, the detector monitors the internal
temperature of the components. The warm-up time may be
longer if the ambient temperature is cool or cold. When the
detector has properly warmed up, the display will show the
Main Menu
.
Figure 17: Start-up screen (left image) and warm-up screen (right image)
3.
As required
♦
Adjust the brightness of the detector display in the Main Menu .
See section 6.4.1, page 109 .
♦
Set date and time on the detector display on the Date & Time
Setup screen. See section 6.4.3.2, page 117 .
Turn the detector off with the main power switch, when instructed to do
so, for example, during maintenance.