Thermo Scientific Corona Veo, Operating Manual

Page: 84 / 262

5 • Installation
Page 84 Charged Aerosol Detectors Corona Veo (RS) Operating Manual
5.6.2.2
Connecting Viper Capillaries
This section describes how to connect Viper™ capillaries that are
designed to be finger-tight.
To connect Viper capillaries with knurl, follow these steps:
NOTICE
•
Tighten or loosen Viper capillaries
only
with your fingers. Do not use
tools other than the knurl that comes with the capillary.
• To avoid damage to the capillary or connection, tighten and loosen
the Viper connections
only
when the system pressure is down to
zero.
AVIS
•
Serrez ou desserrez les capillaires Viper
uniquement
à la main.
N’utilisez aucun outil autre que la molette fournie avec le capillaire.
•
Afin d’éviter d’endommager le capillaire ou le raccord, ne serrez et
ne desserrez les raccords Viper que si le système est sous pression
atmosphérique.
Figure 10: Viper fitting with knurl
1. Insert the Viper capillary into the connection port.
No. Description
1 Knurl
2 Capillary
3 Slot