Thermo Scientific Corona Veo, Operating Manual

Page: 109 / 262

6 • Operation
Charged Aerosol Detectors Corona Veo (RS) Operating Manual Page 109
6.4.1 Main Menu
The Main Menu displays the serial number of the detector, the installed
firmware version and the detector status.
The display shows the
Main Menu
after successful self-test diagnostics
and warm-up phase upon power-up. To navigate to the Main Menu
from other screens, use the dedicated soft key.
If no errors or warnings are active, the Status is Normal .
Figure 18: Main Menu screen (example)
Soft key functions
Soft key Description
Bright- Increasing the display brightness
Decreasing the display brightness
Gas On
Gas Off Starting or stopping the gas flow in the detector
When the gas flow is turned on, the soft key name changes to
Gas Off .
System Menu Accessing the System Setup Menu (see section 6.4.3, page 115 )
Run Mode Starting sample analysis and gas flow (if not yet turned on) and
accessing the
Run Mode Menu (see section 6.4.2, page 110 )