Thermo Scientific Corona Veo, Operating Manual, Page: 72 / 262

5 • Installation
Page 72 Charged Aerosol Detectors Corona Veo (RS) Operating Manual
5.5.2.1
Connections in an UltiMate 3000 System
If the detector is part of an UltiMate 3000 system, for example for
analytical HPLC applications, interconnect the system modules on the
rear panel as shown below.
Apart from the solvent rack, all modules in an UltiMate 3000 system can
be connected separately to the computer via the USB port on the rear
panel of the respective module. However, Thermo Fisher Scientific
recommends interconnecting all modules, and then connecting the
system to the computer with only one connection.
Figure 7: Rear panel connections in an UltiMate 3000 system with
charged aerosol detector (example)
Observe the information on connecting the individual detector ports in
the following sections.
No. Description
1 Solvent Rack (optional)
2 Pump
3 Autosampler
4 Column Compartment
5 Charged Aerosol Detector