Thermo Scientific AI 3000, Operating Manual

Page: 78 / 108

4
AI 3000/AS 3000 II Control
Control from PC
60 AI 3000/AS 3000 Sampling System - Operating Manual Thermo Scientific
Get Method from Sampler — It allows to transfer the AI 3000/AS 3000 II current method
to the GC.
Send Method to Sampler — It transfers the method from the computer to the a AI 3000/AS
3000 II and makes the method active.
Print — This function allows to print the method.
Close — This function allows to close the method. If modifications have been done, the
system will ask where to save them in the method.
Edit Menu
This menu gives access to the following functions:
View Audit Trail — It displays the log file of the method. Each change to the method
parameters is recorded on the log file with the operator’s name as well as the date and time of
the modification. Using the function
Copy
it is possible to copy part or all the log file
contents into Windows and then transfer information to other programs if required.
Command Menu
This menu gives access to the following functions:
Start Clean Cycle — It allows to start a washing cycle.
Inject Single Sample — It allows to start the injection of a single sample.
Force Autoinjector to Stand-by — It interrupts any current operation and forces the AI
3000/AS 3000 II to stand-by.
Help Menu
It allows to have access to the on-line guide.
Messages
This paragraph lists the status and error messages that the computer may display according to
the status of the AI 3000/AS 3000 II.
Status Messages
The status messages are listed below:
• Opening Connection
Note Audit trail method log is available only if a protection policy is active in the data
system.