Thermo Scientific 7165, Operating Manual And Parts List

Page: 41 / 76

9. Press ALT-F10 for configuration screen.
10. Enter into Line Settings screen by typing ALT-P.
11. Type in 11 <Enter>, sets parameters as 9600, 8, N, 1.
12. Type in 21 <Enter>, sets to (COM2:) or (Type in 20 <Enter>, sets to
(COM1:), depending on your computer.
13. Type in 24 <Enter>, saves settings.
14. Press ESC to exit setup menu.
15. Procomm is now ready to accept input from the Thermo Scientific
TII.
16. To begin downloading a file, Type ALT-F1, and give the file an
appropriate name when prompted.
The optional printer (part no. AY1137X1) provides a paper tape record for
future reference. During normal recirculation, the printer prints date, time,
purity and temperature readings once every minute.
1. Make sure the printer and Thermo Scientific TII are turned OFF.
2. Connect the Thermo Scientific TII to the printer via the RS232 port
on the back left side of the unit. Use the tan printer cable included
with the Epson printer. Plug the printer power cord into an electrical
outlet.
3. Turn power on to the Thermo Scientific TII and printer.
4. Press MENU and use the up or down arrows until display reads,
“SYSTEM OPTIONS.”
5. Press OK.
6. From the “Printer Attached” display, press the up or down arrow for
“YES”.
7. Press OK.
8. Press the BACK arrow twice to return to the STANDBY mode.
9. During normal recirculation mode, a purity and temperature reading
will be printed once every 12 minutes.
Connecting and Starting
the Printer
3-26 Type II Water System Thermo Scientific
Section 3
Installation
Procomm (continued)