1-2
Type II Water System
Thermo Scientific
Section 1
Safety Information
6. Disconnect from the power supply prior to maintenance and
servicing.
To avoid personal injury:
1. Do not use in the presence of flammable or combustible materials;
fire or explosion may result. This device contains components that
may ignite such materials.
2. Do not use in the presence of highly corrosive substances such as
bleach or acid baths; fire may result.
3. This device is to be used with water feeds only. Cleaning agents must
be used in compliance with instructions in this manual. Failure to
comply with the above could result in explosion and personal injury.
4. Avoid splashing cleaning solutions on clothing or skin.
5. Ensure all piping connections are tight to avoid chemical leakage.
6. Ensure adequate ventilation.
7. Carefully follow manufacturer's safety instructions on labels of
chemical containers and material safety data sheets.
8. This unit is equipped with an ultraviolet lamp. Ultraviolet radiation is
harmful to the eyes and skin. Do not attempt to observe the lamp
directly.
9. Refer servicing to qualified personnel.
Do not use this product for anything other than its intended usage. If the
equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
Note
The UV lamp contains mercury. If broken or no longer needed, do
not dispose of the UV lamp in the trash. Recycle or dispose of the UV
lamp as hazardous waste.
s
Summary of Contents for 7165
