manualshive.com logo in svg

Thermo Scientific 410iQ, Instruction Manual

Share
Download
Thermo Scientific 410iQ Instruction Manual Download Page 261

System Description 

Common Electronics 

Thermo Scientific 

410iQ Instruction Manual     

8-7

 

 

All electronics operate from a universal VDC supply, which is capable of 
auto-sensing the input voltage and working over all specified operating 
ranges. The 410iQ contains a 24 VDC channel for most electronics 
operation, including the pump and fan, and a 48 VDC channel dedicated 
specifically for optical bench heating. 

Front panel electronic components include the touch screen display, the on 
off switch, and two indicator LEDs for power and alarm status, as 
described in operational detail in Chapter 2, “

Installation and Setup

”. 

The iQ series instruments provide a number of methods for 
communicating the instrument results to the operator or external 
equipment. Every iQ series instrument includes a front panel display, 3 
USB ports, and one Ethernet data port as standard equipment. 

In addition, optional RS-232/485, analog I/O, and digital I/O ports are 
available to provide data to external systems as described in Chapter 9, 
“

Connecting External Devices”

. The front panel GUI allows the operator 

to configure these output communication channels as described in Chapter 
3, “

Operation

”. 

The System Controller Board (SCB) contains the main processor, power 
supplies, and a sub-processor, and serves as the communication hub for the 
instrument. The SCB receives operator inputs from the front panel GUI 
and/or over optional I/O connections on the rear panel. The SCB sends 
commands to the other boards to control the functions of the instrument 
and to collect measurement and diagnostic information. The SCB outputs 
instrument status and measurement data to the GUI, Ethernet/USB, and 
to the optional rear-panel I/O. The SCB plugs into the backplane via a 
single connector and has physical retainers to secure placement. 

The backplane board provides the routing and conditioning for +24 VDC 
(op48 VDC) and RS-485 communications within the instrument. 
It hosts the System Controller Board (SCB) and Peripherals Support Board 
(PSB) via direct plug ins, and similarly hosts optional I/O (communication, 
analog, and digital) with rear panel interfaces via direct plug in. It has 
connections for RS-485 communication with and powering of DMCs and 
the Step POL Module. It additionally routes the front panel display and 
driver, external USB and Ethernet. 

Power Supply

Front Panel

I/O and 

Communication

Components

System Controller

Board

Backplane Board

Summary of Contents for 410iQ



















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands