manualshive.com logo in svg

Thermo Electron Nicolet 380, User Manual

Share
Download
Thermo Electron Nicolet 380 User Manual Download Page 69

 

Smart SpeculATR™ — 

This single-bounce horizontal 

ATR/specular reflection accessory allows versatility in measurement 
where a range of sample morphologies may need to be analyzed. 

Smart SplitPea™ — 

This horizontal ATR microsampling accessory 

is designed for fast analysis of solids, liquids, and powders. It is 
ideal for analyzing hard materials, small samples or samples where 
only minute quantities are available. 
 

Other 

sampling 

accessories 

You can install many of the sampling accessories yourself. After you 
install an accessory, you may have to align it. Instructions for 
aligning the spectrometer are included in the “Maintenance and 
Service” chapter of this manual. Instructions for aligning an 
accessory are provided in the documentation that came with that 
accessory. 

 

Some accessories fit into the sample compartment and require that 
you remove the Snap-In baseplate before installing the accessory. 
For information on using Snap-In baseplates, view “Changing the 
Snap-In baseplate” in the “Using your spectrometer” book in 
Spectrometer Help Topics. 

 

Note

 

Additional Snap-In sample compartment baseplates are available for 
use with each accessory to make changing accessories easier. 

▲

 

Call Thermo Electron if you are interested in ordering any of the 
following sampling accessories. 

Automated external beam mirror — 

If you have a microscope or 

other accessory with an external detector, this option is required. It 
directs the infrared beam out the port on the side of the spectrometer 
to the accessory whenever you select it.  

Automatic sample wheel

 

—

 This accessory holds multiple samples 

and rotates them into the beam path for data collection. The sample 
wheel is commonly used to measure multiple polymer or pressed-
powder samples automatically. 

Nicolet 380 User’s Guide 

63

Summary of Contents for Nicolet 380








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands