Thermion BRIDGEMASTER, Owner'S Manual

Page: 23 / 59

10
4 Controls Start Up Settings:
Use these setting to initially start spraying then adjust to the desired voltage and
amperage.
A. POWER SUPPLY: The power supply must be set for remote operations and for gas
metal arc welding, usually with all optional setting in the off position, i.e. pulsars, etc.
The power supply voltage (for CV) or power (for CC) are controlled at the feeder.
B. SETTINGS ON FEEDER: Voltage or power dial (left dial when looking at machine) set
on 8, feed motor speed control (right dial) set on 4.
C. AIR SUPPLY: 90 psi min., 65 CFM min.