Thermion BRIDGEMASTER, Owner'S Manual

Page: 10 / 59

x
Preface
This manual has been designed for experienced thermal arc spray operators and must be read
completely before using the equipment. If you lack experience or are unfamiliar with the
practices and safe operation of welding equipment, please consult your foreman. Do not
attempt to install, operate, or perform maintenance on this equipment unless you are qualified
and have read and understood this manual. If in doubt about installing or operating this
equipment, contact your distributor.
For the safe and successful use of this equipment, be sure the information contained in this
manual reaches the operator. Extra copies of this manual are available upon request. Please
specify your machine serial number.
This manual is divided into nine sections:
Section 1: Introduction
Section 2: Safety Measures
Section 3: System Assembly
Section 4: Controls
Section 5: Operation (General)
Section 6: Principles of Operation
Section 7: Liner Replacement
Section 8: Parts Required for Various Wire Sizes
Section 9: Components Section
The information contained in this manual represents our best judgment; however, Thermion
Inc. assumes no liability for its use.