Texas Instruments Tiva TM4C123GH6PM, User Manual

Page: 99 / 352

GPIO
ROM Location:
ROM_APITABLE
is an array of pointers located at
0x0100.0010
.
ROM_GPIOTABLE
is an array of pointers located at
ROM_APITABLE[4]
.
ROM_GPIOPinTypeGPIOOutput
is a function pointer located at
ROM_GPIOTABLE[15]
.
Parameters:
ui32Port is the base address of the GPIO port.
ui8Pins is the bit-packed representation of the pin(s).
Description:
The GPIO pins must be properly configured in order to function correctly as GPIO outputs.
This function provides the proper configuration for those pin(s).
The pin(s) are specified using a bit-packed byte, where each bit that is set identifies the pin to
be accessed, and where bit 0 of the byte represents GPIO port pin 0, bit 1 represents GPIO
port pin 1, and so on.
Returns:
None.
10.2.1.18 ROM_GPIOPinTypeGPIOOutputOD
Configures pin(s) for use as GPIO open drain outputs.
Prototype:
void
ROM_GPIOPinTypeGPIOOutputOD(uint32_t ui32Port,
uint8_t ui8Pins)
ROM Location:
ROM_APITABLE
is an array of pointers located at
0x0100.0010
.
ROM_GPIOTABLE
is an array of pointers located at
ROM_APITABLE[4]
.
ROM_GPIOPinTypeGPIOOutputOD
is a function pointer located at
ROM_GPIOTABLE[22]
.
Parameters:
ui32Port is the base address of the GPIO port.
ui8Pins is the bit-packed representation of the pin(s).
Description:
The GPIO pins must be properly configured in order to function correctly as GPIO outputs.
This function provides the proper configuration for those pin(s).
The pin(s) are specified using a bit-packed byte, where each bit that is set identifies the pin to
be accessed, and where bit 0 of the byte represents GPIO port pin 0, bit 1 represents GPIO
port pin 1, and so on.
Returns:
None.
10.2.1.19 ROM_GPIOPinTypeI2C
Configures pin(s) for use by the I2C peripheral.
April 8, 2013 99